Contact Us: Call or text cell# 626-378-0348 Email: jerrysm@sanmartintattoo.com |
SKU/Item Number: MINIKNIFE |
· More details... |
$10 each |
Mini-Folding Knife for Fanning Mags |
Tattoo Tools Page 2 |
This beautiful Mini Knife is the most perfect tool for fanning the needles on Flats or Magnums. Blade is small enough to fit in between the needles to have them fanned out without damaging the needles. Needles that are fanned out provide better puncture into the skin with little resistance. They make for better ink flowing needles, because of the increased capillary action. A must for the true Professional Tattoo Artist. Comes with complete detailed instructions on proper use and care. Specification: Length Overall: 2 7/8" (73mm) Blade Length: 1 5/16" (33mm) Blade Steel: 3Cr13 Length Closed: 1 5/8" (41 mm) Cutting Edge: 1 1/8" (29mm) Weight: .4oz (12g) Hole Diameter: 3/16" (5 mm) Blade Thickness: 1/16" (1.75mm) Handle material: Stainless Steel |
Next → |
Micro Wax Polish for Tattoo Machines |
Excellent for buffing and polishing your tattoo machines. This micro wax provides superior protection from corrosion and deterioration. Use after every tattoo. Comes with complete detailed instructions on proper use and care. |
SKU/Item Number: WAXPOLISH |
$20 each |
Hole Punch for Paper Grommets |
For those Tattoo Artists that like the Old School use of a piece of paper towel on the Armature Bar nipple, instead of a rubber grommet. This hole punch provides the perfect size circle for the Armature Bar nipple. The nipple extension should not exceed 13/64” length and the width .140”, this size is a perfect fit for all A-Bars. Simply punch holes into Bounty Paper Towels and create your own perfect size paper grommets. Place circular paper towel cut-out over nipple and insert needle bar over circular paper towel cut-out, then press into the Armature Bar. You can determine the level of snugness on A-Bars by layering pieces of the circular cut-out until the right fit is created. Comes with complete detailed instructions on proper use and care. |
SKU/Item Number: PAPERGRO |
$30 each |
Hole Punch for A-Bar Dampener |
Use this hole punch to create the perfect circular sticker size for Armature Bars. The main purpose of a sticker underneath an Armature Bar is to reduce VIBRATIONS. However, other benefits include: reduced noise, reduce wear on Armature Bar/ coil cores, smoother running machine and prevents magnetic sticking. The benefits of using a sticker under the Armature Bar out weigh the cons. Machines will require 1 additional voltage to compensate for the sticker being used. Comes with complete detailed instructions on proper use and care. |
SKU/Item Number: ABARDAMP |
· More details... |
$80 each |
Concave file for rounding Contact Screws |
Use this file for rounding the tips of the contact screws. Preferably, the contact screw tip should hit flat with the front spring. However, some machine frames won’t allow the proper angle for the contact screw to hit perfectly flat and there’s only little room for bending the spring tip without affecting machine performance. So rounding the tips of the contact screws for machine frames that have fixed contact screw locations at a relaxed angle, make perfect sense. Contact screws that are not rounded for these relaxed angle machines run the risk of prematurely wearing down the spring. The threads in the contact screw tear at the spring tip. Also, a round tip provides a smoother running machine. Comes with complete detailed instructions on proper use and care. |
SKU/Item Number: CONCAVEF |
$50 each |